| Library | Waveform | Filename | add | Description | info | Channels | Duration | ShortID | Category | Subcategory | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 
|
 |
Tools-KnifePickUpThrownDow.wav | Tools - Knife Pick Up And Thrown Down - C U - Knife Thrown Short Distance Onto A Hard Surface, Could Be Used As Any Medium Small Dense Metal Object, Light Sound On Pick Up, Most Intense @ End | i |
1.0 | 0:09 | Construction |
Tool |
||
| 2 |
|
 |
Tools-MetalScissors-Int-C_5.wav | Tools - Metal Scissors - Int - CU - Short Snip Through Cloth, Scissors Open | i |
2.0 | 0:02 | Construction | Scissors | ||
| 3 | 
|
 |
EFX INT Small Drill Motor on Metal 04.wav | Tool: Tool, Interior, Drill Motor Rubbing Against Small Metal Plate Less Overtones, Sweetener For Multi Barrel Gatling Gun | i |
2.0 | 0:09 | Construction | Drill | ||
| 4 |
|
 |
Tools-MitreSaw-Int-CU-Saw_3.wav | Tools - Mitre Saw - Int - CU - Sawing Ice, Slow Scrapes And Light Squeaks | i |
2.0 | 0:04 | Construction | Saw Mitre Saw | ||
| 5 | 
|
 |
ArcWelding.BBC.ECD43d.wav | Construction, Arc Welding: Arc Welding Machine, Switch On, Strike Arc 2nd Attempt, Weld Off. | i |
2.0 | 0:43 | Construction | Construction Arc Welding | ||
| 6 |
|
 |
Tools-NailAirGun-Close-Up_8.wav | Tools - Nail Air Gun - Close-Up - Pneumatic, Single, Dull Thwack With Some Hissing Air Burst | i |
2.0 | 0:01 | Construction | Nail Gun | ||
| 7 |
|
 |
PneumaticDrills.BBC.ECD43.wav | Construction, Drill: Pneumatic Drill Used On Tarmac. | i |
2.0 | 3:12 | Construction | Construction Drill | ||
| 8 |
|
 |
Ratchets-Handcuffs-CloseT_6.wav | Ratchets - Handcuffs - Close Tighten - Int - CU - Small Movement, Quick, Snappy | i |
1.0 | 0:01 | Construction | Ratchet Tool | ||
| 9 |
|
 |
Ratchets-LargeRatchets-M_23.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Metal Groan And Moan | i |
2.0 | 0:04 | Construction | Ratchet Tool | ||
| 10 |
|
 |
Tools-PaintBrush-Int-CU-W_6.wav | Tools - Paint Brush - Int - CU - Wet Cloth Splat | i |
2.0 | 0:05 | Construction | Paint Brush | ||
| 11 |
|
 |
Ratchets-LargeRatchets-Me_3.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Clunk To Stop | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 12 |
|
 |
Tools-HandHeld-HedgeShea_12.wav | Tools - Hand Held - Hedge Shears - MCU - Big Opening And Hard Close W Clack, Various | i |
2.0 | 0:03 | Construction | Hedge Clippers | ||
| 13 |
|
 |
Tools-ShovelDigsInDirt-CU-M.wav | Tools - Shovel Digs In Dirt - C U - Multiple People Digging Simultaneously, Very Clean, With No Dirt Slides | i |
2.0 | 0:18 | Construction | Shovel | ||
| 14 |
|
 |
Ratchets-MetalDYLAFishin_24.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Fast | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 15 |
|
 |
Ratchets-MetalDYLAFishin_41.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Fast | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 16 |
|
 |
Tools-HandPoweredStapleGu_1.wav | Tools - Hand Powered Staple Gun - Int - C U - Single | i |
2.0 | 0:01 | Construction | Staple Gun | ||
| 17 |
|
 |
Ratchets-MetalFishingRee_31.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks, Slow | i |
2.0 | 0:02 | Construction | Ratchet Tool | ||
| 18 |
|
 |
Tools-HandTools-SledgeHamme.wav | Tools - Hand Tools - Sledge Hammer - Int - CU - Hit To Concrete Or Cement | i |
2.0 | 0:01 | Construction | Hammer Sledge Hammer | ||
| 19 |
|
 |
Tools-14-OzPropaneTorch-I_1.wav | Tools - 14-Oz Propane Torch - Int - CU Gas Light, Igniter Click And Long Flame Engage | i |
2.0 | 0:12 | Construction | Tool | ||
| 20 |
|
 |
Ratchets-MiscellaneousRatch.wav | Ratchets - Miscellaneous Ratchets - Ratchet Movement - Int - CU - Constant, Medium Speed | i |
2.0 | 0:04 | Construction | Ratchet Tool | ||
| 21 |
|
 |
Tools-HedgeClippers-CU-Sm_2.wav | Tools - Hedge Clippers - CU - Small, Short Snips W Branch Rustling | i |
2.0 | 0:09 | Construction | Hedge Clippers | ||
| 22 |
|
 |
Tools-Air-PoweredScrewdr_15.wav | Tools - Air-Powered Screwdriver - Int - CU - Drilling In Small Spurts | i |
2.0 | 0:05 | Construction | Screwdriver Air Powered | ||
| 23 |
|
 |
Ratchets-PlasticFishingReel.wav | Ratchets - Plastic Fishing Reel Turning With Clicks - C U - Medium Fast Reel Rotating With Clicks, Some Various In Speed | i |
2.0 | 1:08 | Construction | Ratchet Tool | ||
| 24 |
|
 |
Tools-AutoMechanicsServi_14.wav | Tools - Auto Mechanics Service Station Activity - Int - Doors Open - Pneumatic Air Wrench, Air Compressor Motors, Tire Changing Machine, Slams | i |
2.0 | 0:05 | Construction | Tool | ||
| 25 |
|
 |
Ratchets-Handcuffs-CloseT_1.wav | Ratchets - Handcuffs - Close Tighten - Int - CU - Quick, Snappy | i |
1.0 | 0:01 | Construction | Ratchet Tool | ||
| 26 |
|
 |
Ratchets-LargeRatchets-M_18.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Clunk To Stop | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 27 |
|
 |
Tools-PaintBrush-Int-CU-W_1.wav | Tools - Paint Brush - Int - CU - Wet Gurgling Squishes | i |
2.0 | 0:29 | Construction | Paint Brush | ||
| 28 |
|
 |
Ratchets-LargeRatchets-M_50.wav | Ratchets - Large Ratchets - Metal Gear Clanks - Int - MCU - Big Ratchet Turning, Reverb, Constant Motion | i |
2.0 | 0:32 | Construction | Ratchet Tool | ||
| 29 |
|
 |
Tools-HandHeld-HedgeClipp_5.wav | Tools - Hand Held - Hedge Clippers - Int - MCU - Clipping Brush, Medium Speed, Various | i |
2.0 | 0:03 | Construction | Hedge Clippers | ||
| 30 |
|
 |
Tools-ShovelDigsInDirt-CU_1.wav | Tools - Shovel Digs In Dirt - C U - Multiple People Digging Simultaneously, Very Clean, With No Dirt Slides | i |
1.0 | 0:18 | Construction | Shovel | ||
| 31 |
|
 |
Ratchets-MetalDYLAFishin_19.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, V Slow | i |
2.0 | 0:07 | Construction | Ratchet Tool | ||
| 32 |
|
 |
Ratchets-MetalDYLAFishin_36.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Slow | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 33 |
|
 |
Tools-HandHeld-HedgeShear_6.wav | Tools - Hand Held - Hedge Shears - CU - Hard, Fast And Scrapey Sounding Open And Close, Various | i |
2.0 | 0:02 | Construction | Hedge Clippers | ||
| 34 |
|
 |
Ratchets-MetalFishingRee_26.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks, Clicks, And Rattles, Slow | i |
2.0 | 0:06 | Construction | Ratchet Tool | ||
| 35 |
|
 |
Tools-HandTools-SledgeHam_5.wav | Tools - Hand Tools - Sledge Hammer - Int - CU - Hit To Concrete Or Cement | i |
2.0 | 0:01 | Construction | Hammer Sledge Hammer | ||
| 36 |
|
 |
Ratchets-SteelCableWinch-_5.wav | Ratchets - Steel Cable Winch - Ext - CU - Metal, Medium Speed Wind Up Descending In Tone, Fast Spin Release | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 37 |
|
 |
Ratchets-MiscellaneousRat_5.wav | Ratchets - Miscellaneous Ratchets - Ratchet Movement - Int - CU - Constant, Medium Speed | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 38 |
|
 |
Tools-HedgeClippers-CU-Sh_2.wav | Tools - Hedge Clippers - CU - Short, Medium-Hard Snips W Branches Rustling | i |
2.0 | 0:07 | Construction | Hedge Clippers | ||
| 39 |
|
 |
Tools-Air-PoweredScrewdr_10.wav | Tools - Air-Powered Screwdriver - Int - CU - Short Spurts Of High Pitched Buzzing W Small Screw Rattling | i |
2.0 | 0:07 | Construction | Screwdriver Air Powered | ||
| 40 |
|
 |
Ratchets-PlasticDAMQuickF_9.wav | Ratchets - Plastic DAM Quick Fishing Reel - CU - High Pitched Reeling, Spinning, And Clicking, V Slow | i |
2.0 | 0:05 | Construction | Ratchet Tool | ||
| 41 |
|
 |
Tools-AutomaticGrinder-Int-.wav | Tools - Automatic Grinder - Int - MCU - Motor Start, Steady, Long Wind-Down, And Off | i |
2.0 | 1:37 | Construction | Tool | ||
| 42 |
|
 |
Tools-Jackhammer-Ext-MCU-_3.wav | Tools - Jackhammer - Ext - MCU - Jackhammering Concrete, Long Strand | i |
2.0 | 0:24 | Construction | Hammer Jackhammer | ||
| 43 |
|
 |
Tools-MetalScissors-Int-_31.wav | Tools - Metal Scissors - Int - CU - Hard Snip And Open Of Blades | i |
1.0 | 0:02 | Construction | Scissors | ||
| 44 |
|
 |
EFX INT Small Drill Motor on Iron 07.wav | Tool: Tool, Interior, Drill Motor Rubbing Against Small Metal Plate, Sweetener For Multi Barrel Gatling Gun | i |
2.0 | 0:02 | Construction | Drill | ||
| 45 |
|
 |
Tools-MetalTools-Int-Close-.wav | Tools - Metal Tools - Int - Close-Up - Sliding | i |
1.0 | 0:01 | Construction | Tool | ||
| 46 |
|
 |
AcetyleneTorches.BBC.EC57Kb.wav | Construction, Acetylene Torches: Oxy-acetylene Torch Cutting Sheet Metal. | i |
2.0 | 2:10 | Construction | Construction Acetylene Torches | ||
| 47 |
|
 |
Tools-NailAirGun-Close-Up_3.wav | Tools - Nail Air Gun - Close-Up - Pneumatic, Single Loud Click With Hissing Air Burst | i |
2.0 | 0:01 | Construction | Nail Gun | ||
| 48 |
|
 |
Drills.BBC.ECD43c.wav | Construction, Drill: Hand-drill, 2 Holes In Wood. | i |
2.0 | 0:20 | Construction | Construction Drill | ||
| 49 |
|
 |
Ratchets-SmallRatchets-Meta.wav | Ratchets - Small Ratchets - Metal - Int - CU - Spins W Ringing Sound | i |
2.0 | 0:04 | Construction | Ratchet Tool | ||
| 50 |
|
 |
Ratchets-MetalRatchet-CU-Sh.wav | Ratchets - Metal Ratchet - C U - Short Whirs, Clacks, Dull Chain Feel, Bigger Than A Wrench | i |
2.0 | 0:17 | Construction | Ratchet Tool | ||
| 51 |
|
 |
Tools-HedgeClippers-CU-Me_7.wav | Tools - Hedge Clippers - CU - Medium-Hard Snips W Random Pace | i |
2.0 | 0:07 | Construction | Hedge Clippers | ||
| 52 |
|
 |
Tools-Air-PoweredLathe-In_6.wav | Tools - Air-Powered Lathe - Int - CU - Motor Start, Steady, And Wind-Down, Fast | i |
2.0 | 0:08 | Construction | Lathe | ||
| 53 |
|
 |
Ratchets-PlasticDAMQuickF_4.wav | Ratchets - Plastic DAM Quick Fishing Reel - CU - High Pitched Reeling, Spinning, And Clicking, Fast | i |
2.0 | 0:05 | Construction | Ratchet Tool | ||
| 54 |
|
 |
Tools-ArcWelder-Int-CU-Co_2.wav | Tools - Arc Welder - Int - CU - Constant Sparks, Loud | i |
2.0 | 0:38 | Construction | Construction Arc Welding | ||
| 55 |
|
 |
Tools-Chainsaw-Exterior-M_4.wav | Tools - Chainsaw - Exterior - Medium - False Start, Recording Cut Offs Idling Chainsaw | i |
2.0 | 0:16 | Construction | Chainsaw | ||
| 56 |
|
 |
Tools-MetalScissors-Int-_26.wav | Tools - Metal Scissors - Int - CU - Dull Snips | i |
1.0 | 0:03 | Construction | Scissors | ||
| 57 |
|
 |
EFX INT Small Drill Motor on Iron 02.wav | Tool: Tool, Interior, Drill Motor Rubbing Against Small Metal Plate, Sweetener For Multi Barrel Gatling Gun | i |
2.0 | 0:03 | Construction | Drill | ||
| 58 |
|
 |
Tools-MetalTools-Int-Clos_5.wav | Tools - Metal Tools - Int - Close-Up - Continuous Medium Loud Clatter, High-Pitched Rings, Some Sliding | i |
1.0 | 0:01 | Construction | Tool | ||
| 59 |
|
 |
Blowlamps.BBC.EC110Kb.wav | Pumping A Blowlamp. | i |
2.0 | 0:24 | Construction | Blowlamp | ||
| 60 |
|
 |
Tools-NailAirGun-Close-U_26.wav | Tools - Nail Air Gun - Close-Up - Pneumatic, Empty Misfire, Valves Open And Shut With Air Hiss | i |
2.0 | 0:02 | Construction | Nail Gun | ||
| 61 |
|
 |
DrillsElectric.BBC.ECD43e.wav | Construction, Drill: Electric Drill, Single Hole In Thick Metal Bar. | i |
2.0 | 0:35 | Construction | Construction Drill | ||
| 62 |
|
 |
Ratchets-FishingReelTurni_1.wav | Ratchets - Fishing Reel Turning With Metallic Ring - C U - Medium Fast Reel Rotating With Clicky Musical Ring | i |
2.0 | 0:33 | Construction | Ratchet Tool | ||
| 63 |
|
 |
Ratchets-LargeRatchets-M_13.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Clunk To Stop | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 64 |
|
 |
Ratchets-LargeRatchets-M_45.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Metal Groan And Moan | i |
2.0 | 0:05 | Construction | Ratchet Tool | ||
| 65 |
|
 |
Tools-HammeringWood-Int-Clo.wav | Tools - Hammering Wood - Int - Close-Up - Medium Hard Burst | i |
1.0 | 0:04 | Construction | Hammer | ||
| 66 |
|
 |
Tools-Round-TippedMetalBl_4.wav | Tools - Round-Tipped Metal Blade Scissors - CU - Light, Medium-Slow Snips | i |
2.0 | 0:03 | Construction | Scissors | ||
| 67 |
|
 |
Ratchets-MetalDYLAFishin_14.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Slow | i |
2.0 | 0:07 | Construction | Ratchet Tool | ||
| 68 |
|
 |
Ratchets-MetalDYLAFishin_31.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Slow | i |
2.0 | 0:04 | Construction | Ratchet Tool | ||
| 69 |
|
 |
Tools-HandHeld-HedgeShear_1.wav | Tools - Hand Held - Hedge Shears - CU - Hard, Fast And Scrapey Sounding Open And Close, Various | i |
2.0 | 0:01 | Construction | Hedge Clippers | ||
| 70 |
|
 |
Ratchets-MetalFishingRee_21.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks, Slow | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 71 |
|
 |
Tools-HandTools-SledgeHa_27.wav | Tools - Hand Tools - Sledge Hammer - Int - CU - Hit To Concrete Or Cement W Out Roll Off | i |
2.0 | 0:01 | Construction | Hammer Sledge Hammer | ||
| 72 |
|
 |
DrillsElectric.BBC.ECD43f.wav | Construction, Drill: Electric Drill, Rotart Sanding Attachment Used On Plywood Sheet. | i |
2.0 | 2:28 | Construction | Construction Drill | ||
| 73 |
|
 |
Ratchets-ChainHoist-CU-Fast.wav | Ratchets - Chain Hoist - CU - Fast Hard Clicks, Large Reverberant Room W Steady Hum In BG | i |
1.0 | 0:11 | Construction | Ratchet Tool | ||
| 74 |
|
 |
Ratchets-ChainHoist-CU-Me_1.wav | Ratchets - Chain Hoist - CU - Medium Fast Hard Clicks, Large Reverberant Room W Steady Hum In BG | i |
1.0 | 0:08 | Construction | Ratchet Tool | ||
| 75 |
|
 |
Ratchets-LargeRatchet-Dul_9.wav | Ratchets - Large Ratchet - Dull Ratchet - Int - CU - Slow Turns Twists | i |
2.0 | 0:02 | Construction | Ratchet Tool | ||
| 76 |
|
 |
Ratchets-LargeRatchets-M_40.wav | Ratchets - Large Ratchets - Metal Ratchet Movement - Int - CU - Big Metal Groan And Moan | i |
2.0 | 0:06 | Construction | Ratchet Tool | ||
| 77 |
|
 |
Tools-DavinciPaintStudio-CU.wav | Tools - Davinci Paint Studio - C U - Paint Studio Miscellaneous Background Action, Paint Pours, Brush Paint And Rub, Clean Brush In Water, Wringing And Knocking It Out, Easel Movement | i |
2.0 | 1:39 | Construction | Paint Brush | ||
| 78 |
|
 |
Tools-PlasticHandledScissor.wav | Tools - Plastic Handled Scissors - CU - Slow Snips | i |
2.0 | 0:05 | Construction | Scissors | ||
| 79 |
|
 |
Ratchets-MediumRatchets-Met.wav | Ratchets - Medium Ratchets - Metal Cable Winch - Int - CU - Continuous Turn In A Single Direction | i |
2.0 | 0:08 | Construction | Ratchet Tool | ||
| 80 |
|
 |
Ratchets-MetalDYLAFishin_26.wav | Ratchets - Metal DYLA Fishing Reel - CU - High Pitched Clicking, Cranking, Medium-Slow | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 81 |
|
 |
Tools-HandHeld-HedgeShea_29.wav | Tools - Hand Held - Hedge Shears - MCU - Fast, Hard Open And Close W Clack, Various | i |
2.0 | 0:02 | Construction | Hedge Clippers | ||
| 82 |
|
 |
Ratchets-MetalFishingRee_16.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks, Slow | i |
2.0 | 0:06 | Construction | Ratchet Tool | ||
| 83 |
|
 |
Tools-HandTools-SledgeHa_22.wav | Tools - Hand Tools - Sledge Hammer - Int - CU - Hit To Concrete Or Cement W Out Roll Off | i |
2.0 | 0:01 | Construction | Hammer Sledge Hammer | ||
| 84 |
|
 |
Ratchets-SmallRatchets-Me_5.wav | Ratchets - Small Ratchets - Metal - Int - CU - Spins W Ringing Sound | i |
2.0 | 0:13 | Construction | Ratchet Tool | ||
| 85 |
|
 |
Ratchets-MetalFishingReel_6.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks W Small Metal Jingling, Slow | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 86 |
|
 |
Tools-HedgeClippers-CU-Me_2.wav | Tools - Hedge Clippers - CU - Medium-Hard Snips W Random Pace | i |
2.0 | 0:05 | Construction | Hedge Clippers | ||
| 87 |
|
 |
Tools-Air-PoweredLathe-In_1.wav | Tools - Air-Powered Lathe - Int - CU - Motor Start, Steady, Wind-Down | i |
2.0 | 0:28 | Construction | Lathe | ||
| 88 |
|
 |
Ratchets-PlasticDAMQuick_25.wav | Ratchets - Plastic DAM Quick Fishing Reel - CU - High Pitched Reeling, Spinning, And Clicking, Medium-Slow | i |
2.0 | 0:01 | Construction | Ratchet Tool | ||
| 89 |
|
 |
Tools-AirScrewDriver-Int-_1.wav | Tools - Air Screw Driver - Int - CU - High-Pitched Whine, Buzz | i |
2.0 | 0:16 | Construction | Screwdriver Air Powered | ||
| 90 |
|
 |
Tools-Chainsaw-CuttingTre_1.wav | Tools - Chainsaw - Cutting Trees - Exterior - Revs, Distant And Medium Pov, Some Background Cicadas And Bird Chirps | i |
2.0 | 2:57 | Construction | Chainsaw | ||
| 91 |
|
 |
Tools-MetalScissors-Int-_21.wav | Tools - Metal Scissors - Int - CU - Hard Close And Open Of Blades | i |
1.0 | 0:01 | Construction | Scissors | ||
| 92 |
|
 |
EFX INT Cordless Drill 02.wav | Drill: Drill, Interior, Cordless Drill Motor Rev On, Off, Very Close Motor Perspective | i |
2.0 | 0:03 | Construction | Drill | ||
| 93 |
|
 |
Tools-MetalTools-Int-Clo_18.wav | Tools - Metal Tools - Int - Close-Up - Medium Loud Clanging Impacts, Lots Of Scraping, High-Pitched | i |
1.0 | 0:01 | Construction | Tool | ||
| 94 |
|
 |
Blowlamps.BBC.ECD150d.wav | Blowlamp Turned Off. | i |
2.0 | 0:14 | Construction | Blowlamp | ||
| 95 |
|
 |
Tools-NailAirGun-Close-U_21.wav | Tools - Nail Air Gun - Close-Up - Pneumatic, Single Thudding Click With Air Hiss Burst | i |
2.0 | 0:01 | Construction | Nail Gun | ||
| 96 |
|
 |
Ratchets-MediumRatchets-M_3.wav | Ratchets - Medium Ratchets - Metal Cable Winch - Int - CU - Continuous Turn In A Single Direction | i |
2.0 | 0:08 | Construction | Ratchet Tool | ||
| 97 |
|
 |
Tools-HandHeld-HedgeShea_24.wav | Tools - Hand Held - Hedge Shears - CU - Big Opening And Hard Close W Clack, Various | i |
2.0 | 0:02 | Construction | Hedge Clippers | ||
| 98 |
|
 |
Tools-Spring-LoadedGrass_5.wav | Tools - Spring-Loaded Grass And Weed Shears - MCU - Medium-Slow Snipping W Varied Pace | i |
2.0 | 0:12 | Construction | Hedge Clippers | ||
| 99 |
|
 |
Ratchets-MetalFishingRee_11.wav | Ratchets - Metal Fishing Reel - Int - CU - Cranks And Clicks W Small Metal Jingling, Slow | i |
2.0 | 0:03 | Construction | Ratchet Tool | ||
| 100 |
|
 |
Tools-HandTools-SledgeHa_17.wav | Tools - Hand Tools - Sledge Hammer - Int - CU - Hit To Concrete Or Cement W Out Roll Off | i |
2.0 | 0:01 | Construction | Hammer Sledge Hammer |